50MHz Oscilloscopes with Delayed Sweep ( GOS-653G )
GOS-653G Oscilloscope
GOS-653G (50MHz) 50 MHz Oscilloscope
FEATURES : 1. 50 MHz, Dual Channel 2. Delayed Sweep 3. Built-in Delay Line 4. TV Synchronization 5. Z axis input 6. ALT Triggering Function 7. Hold off Function 8. Trigger level lock function 9. CH1 output
50MHz GOS-653G Specifications:
CRT
Type 6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
Phosphor P31
Accelerating Potential 12 kV
Illumination Continuously adjustable
Z-axis input Input Impedance : Approx. 5kΩ
Sensitivity : Above 3Vp-p
Bandwidth : DC ~ 5MHz
--------------------------------------
VERTICAL SYSTEM
Sensitivity 5mV ~ 5V/DIV +3%, 1mV ~ 2mV/DIV +5%
Bandwidth DC ~ 50MHz
DC ~ 15MHz at 1mV ~ 2mV/DIV
Rise Time 7nS (23.3nS at 1mV ~ 2mV/DIV)
Signal Delay Leading edge can be monitored
Input Impedance Approx. 1MΩ
Input Coupling AC, DC, GND
Vertical Mode CH1, CH2, DUAL, CH2 INV, ADD.(Dual automatic switching ALT and CHOP)
--------------------------------------
HORIZONTAL SYSTEM
A (main) Sweep Time 0.1μS ~ 0.5S / DIV+3%,
100nS ~ 50mS / DIV+5% (x 10MAG),
10nS ~ 50nS/DIV+8% (x 10MAG)
B (delay) Sweep Time 0.1μS ~ 0.5mS / DIV+3%,
100nS ~ 50μS / DIV+5%(x 10MAG),
10nS ~ 50nS / DIV+8% (x 10MAG)
Delay Time 1μS ~ 5mS, +5%
Delay Time Jitter Better than 1:10000
----------------------------------------------
TRIGGER
Trigger Mode AUTO, NORM, SINGLE
Trigger Source CH1, CH2, ALT, LINE, EXT
Trigger Coupling AC, DC, HR, REJ, TV
Trigger Slope "+" or "-"
--------------------------------------
X-Y OPERATION
Sensitivity 5mV ~ 5V / DIV+ 4%
X-axis Bandwidth DC ~ 2MHz
Phase Error 3o or less from DC ~ 100kHz
------------------------------------
OUTPUT SIGNAL
Trigger Signal Output Voltage : approx. 50mV / DIV into 50Ω
Calibrator Output 1kHz Squarewave, 2Vpp+2%
-------------------------------------
POWER SOURCE AC 100V / 120V / 220V / 230V + 10%, 50 / 60Hz
-------------------------------------
ACCESSORIES Power cord x 1;Instruction manual x 1 ;Probes(10:1/1:1)x2
