Product ID: CA-600
DC/AC Current Clamp Adapter
Coverts any DMM to a current clamp
|
 |
| CA-600, AC/DC Current Clamp Adapter |
|
|
CA-600 Features:
Measure current without disconnecting circuit under test
AC/DC 600A capability
Dual Hall-effect sensors
Accuracy DC:+/- 2%+2A AC: +/- 3%+2A (50~400Hz)
For use with any multi-meter at 200mV or 2V ranges for direct readout.
Input impedance at least 1MΩ
Power on indicating
Zero adjustment knob to compensate the hysteresis effect in
DC Measurements.)
Transformer ratio:1000:1
Output 1mV/A
Jaw opening capability:30mm conductor
Confirm to Safety:IEC 1010-1, IEC 1010-2-032,UL,CE approved.
Low battery indication
Able to work with oscilloscope by using optional accessory CA-06(BNC male to Dual binding post)
|
- Specifications :
- Measurement range:
- 600A DC or AC
- Accuracy:
- +/-(2% reading +2A)
- Frequency Response (AC):
- 50Hz to 400Hz
- Input Resistance:
- 10kHz typical
- Maximum Conductor Size:
- 1.1" (30mm)
- General:
- Power Requirement:
- 9V battery
- Dimensions
- 7x2.75x1.3(178x70x33mm)
- Weight: 11 oz. (290g)
- Accessories: Battery, owners man
|
 |
| CA-06, BNC Male to Dual Binding Post. To screw off red and black terminal and plu them into CA-60 to be able to connect with Oscillosocpe. |
|
|
|